![NECTOGROUP | Join Innovation [EN] Logo](https://www.nectogroup.com/en/wp-content/uploads/2018/09/logo_nectogroup.png){kind=logo}
![NECTOGROUP | Join Innovation [EN] Logo](https://www.nectogroup.com/en/wp-content/uploads/2018/09/logo_nectogroup_sticky.png){kind=logo}
New BHP Series: high-performance polyamide cable glands, engineered to ensure optimal tensile strength, heat resistance, and liquid protection where traditional metal cable glands are insufficient, all at a reduced cost.
More than just a basic wiring accessory, a highly efficient solution, built to provide optimal sealing while keeping costs down without compromising on quality.
The difference that really matters.
High Performance Cable Glands
-
Protection rating: IP68 (10 bar), IP69K
-
Mounting Hole Diameter (M20): Up to 21.7 mm
-
Material: High-strength PA6
-
Operating temperature: -40 °C to +100 °C (150 °C intermittent)
-
Flammability: UL94 V0
-
Approvals: DIN EN 62444, UL 514B/746C, CSA, TYPE 4X
Standard Cable Glands
-
Protection rating: IP68 (10 bar), IP69K
-
Mounting Hole Diameter (M20): Up to 20.4 mm
-
Material: Brass/ PA6
-
Operating temperature: -20 °C to +100 °C
-
Flammability: UL94 V2/V0
-
Approvals: DIN EN 62444, UL, CSA
Durability
Made of plastic materials resistant to mechanical, environmental, and thermal stresses.
- Body and cap made of high-strength PA6 (Polyamide 6)
- Seals made of CR and NBR
- Ingress Protection Rating IP68 (10 Bar)
- Ingress Protection Rating IP69K
- Permanent: -40°C to +100°C
- Intermittent: -60°C to +150°C
Easy assembly
These cable glands are equipped with a lamellar clamping system that ensures fast, easy installation while preventing damage to the cable.
Adaptability
The BHP cable gland features a built-in groove for the O-ring, which ensures a secure seal even with slightly oversized holes (e.g. M20 up to 21.7 mm), helping to avoid additional machining or rework.
Certifications
The product is manufactured according to DIN EN 62444 and is UL 514B/746C, CSA, TYPE 4X certified.